LEASHES, TETHERS, CLIPS & FASTENING SYSTEMS
All leashes, tethers and attachment clips are hand made using traditional methods associated to the marine industry and produced from quality materials.
Rod and Paddle Leashes
'Leash it or lose it'. Many anglers who use a kayak for fishing have a story to tell about the rod/reel they watched go over the side and disappear into the depths. It is a heart breaking tale especially if expensive. Paddles are another item that is best attached to the kayak especially if a user does solo missions, where losing it can pose potential risk. Leashes are the best way to keep items attached to a kayak. The Rob Fort Series range offers a variety of leashes that cater to most applications and budgets. They incorporate two designs that use various materials and traditional manufacturing techniques. Choose from snap swivel clip or a multi directional design incorporating brass barrel swivel and snap clip. All leashes include an inline end loop that connects to a rod/paddle with a half hitch that will tighten when under pressure. All leashes feature supple twist free movement with cord that won't create sound when knocking against the kayak, long lifespan
and trouble free use.
Rod Paddle Leash - Swivel Clip
Code: RPLSC
Quality 316 stainless swivel clip eliminates twisting of leash.
5mm braided polyester cord and 2mm cord loop
Leash length from clip to end of loop 122 centimeters long.
Strong and flexible.
Rod/Paddle Leash Swivel Snap Clip
Code: RPLSSC
Unique multi-directional design using quality brass barrel swivel that eliminates twisting of leash.
5mm braided polyester cord and 2mm cord loop
Leash length from clip to end of loop 122 centimeters long.
Rod/Paddle Leash - Plaited Swivel Clip
Code: RPLPSC
Quality 316 stainless swivel clip eliminates twisting of leash.
Hand plaited using 2mm braided polyester cord. 2mm cord loop
Length from clip to tip of loop 115cm long.
Rod/Paddle Leash - Plaited Swivel Snap Clip
Code: RPLPSSC
Unique multi-directional design using quality brass barrel swivel that eliminates twisting of leash.
Hand plaited using 2mm braided polyester cord.
Length from clip to tip of loop 115cm long.
Rod/Paddle Leash – bungee/swivel clip
Code: RPLBSC
Stainless swivel clip eliminates twisting of leash
3mm bungee cord stretches over 2.2 meters
Length from clip end to tip of loop: 126cm long
Attachment Clips
Attach leashes, equipment and other accessories to the kayak using any one of the three attachment systems available. 316 grade stainless steel clips are used in two styles to allow for multiple and small size items. Heavy duty braided cord is connected using traditional binding and are extremely strong to ensure they hold items securely. This end loop can be connected to kayak deck fittings using a half hitch that will tighten when under pressure. Attachment clips are available in three different cord loop lengths.
Attachment Clip – long
Code: ACL
Total length: 35cm
2.5mm braided polyester cord.
Loop length 30cm long.
Attachment Clip – short
Code: ACS
Total length: 25cm
2.5mm braided polyester cord.
Total length 20cm long.
Attachment Clip – large
Code: ACLG
Total length: 33.5cm
2.5mm braided polyester cord.
Loop length 27.5cm long.
Personal Tether
Safety message - Kayakers that go out on their own need to consider what could happen if they capsize and become separated from the kayak. There are a number of factors that can cause this including wind that is likely to quickly move a kayak away from them. Even when a kayak is anchored to the sea floor a user can be separated by strong currents or rips. This is easily avoided by using a tether line to stay connected to the kayak. A personal tether line should never be connected to the waist area of the body. It is safer to attach the user at the upper part of the chest area using a belt or harness with quick release device. This is important so the user can
release from the system in emergency. With the belt below the arms, attach the tether so it is positioned at the rear of the body against the back. The Rob Fort Series personal tether is designed for use with sit on-top kayaks offering a bungee system with outer webbing sleeve to absorb movement and provide strong connection. The incorporated carabiner clip attaches to a stainless D-ring that is included with the tether and large enough to fit a 50mm belt or harness. At the opposite end of the tether is a large snap clip with an opening wide enough to fit over various attachment points on the kayak. All materials used are marine grade and 316 stainless steel..
Code: PT
Compressed length: 140 cm
Stretches to 200cm
Includes 50mm Stainless D-ring
Heavy duty outer webbing sleeve.
316 grade stainless quick link and snap hook.
Bungee Attachment Hooks
Ideal for attaching small and large equipment items to the kayak. They are perfect for many situations including rod containment during surf entry/exit and with spearfishing gear. Attachment hooks are located at each end of the bungee cord to allow existing deck lines and fittings on the kayak to be utilized. Strong nylon hooks are connected to heavy duty 6mm shock cord
and are available in two lengths.
Bungee Attachment Hook - short
Code: BAHS
Ideal for attaching smaller equipment items
Length: 50cm - Extends up to 1 meter
Bungee Attachment Hook - long
Code: BAHL
Ideal for attaching larger equipment items
Length: 75cm - Extends over 1 meter
Rubber Well Nut
The rubber well nut offers an option for attachment of accessories when internal access is not possible and a watertight seal is required. This makes them ideal for use with kayaks and other watercraft. The rubber well nut will fasten on wall thicknesses up to 9mm and requires a 9.5mm hole drilled into the substrate. To attach accessories use the correct size M5 bolt. The well nut has a brass insert, and when fully tightened compresses the rubber housing against the internal surface. This offers a solid connection and watertight seal.The rubber well nut comes supplied on its own or with a M5 bolt.
Above: Rubber well nut & bolt
Rubber Well Nut - 10 pack
Code: RWN
5mm brass thread insert
Does not include bolt
Rubber Well Nut & Stainless Bolt - 10 pack
Code: RWNB
Includes 30mm M5 bolt